Use The High Pressure Cleaning To Increase The Longevity Of The Driveway

Posted by in Pressure cleaning Adelaide | September 27, 2018

With technological development, the cleaning process has also changed dramatically in modern age. The high pressure cleaning process is primarily designed to help you enjoy an easier and accessible method of maintenance for your home or office to relief from the dirt, grease and other pollutants of the surface. To help you better, there are lots of pressure cleaning organizations that use high pressure to clean the surface with flow of hot or cold spray. Quite a few service providers of driveway pressure cleaning Adelaide have come up with effective techniques to help you pressure wash the dirt areas. The steps given below in the blog will guide you to proper cleaning of your driveways.

Step 1 :

Clean excess dirt and grime from the surface with the help of a broomstick. Cover nearby exterior walls and windows with the help of plastic sheet and painters tape. This will protect them from any kind of lose debris as well as paint or stain removed from the wash.

Step 2 :

If you’re doing it alone then read the manual thoroughly before performing the wash. This ensures that you not only protect yourself from any kind of injuries but also prevent mistakes while using the wash. It would be ideal to take the help of servicemen from high pressure cleaning Adelaide as you’ll be assured that the task is performed well.

Step 3 :

Set your cleaner ready by attaching the garden hose and the 25 degree nozzle. Now turn it on and give your driveway a wash to remove loose debris like pebbles, grass and any small tree leaves or branches.

Step 4 :

Now is the time to apply detergent. Be sure to read your machine manual to know which the recommended driveway cleaners are to use with your particular washer. Also be sure to attach the soaping nozzle at this stage. The soaping nozzle is designed to soak the driveway as oppose to blasting it clean then let the detergent work its magic on the surface before you start cleaning it.

Step 5 :

Now that the detergent has broken down the driveway stains and tough grime, mildew and other dirt, it is ready to blast it all away. A surface cleaner attachment is the recommended method. A surface cleaner attachment will complete the clean faster and better because it disperses the water over a larger area – not only reducing risk of concrete damage from high pressure but also pulsing the flow to more readily tear the dirt and grime from the surface.

Step 6 :

A rotary nozzle does a similar thing to the water flow as a surface cleaner. It pulses/rotates the flow of water to greater push and peel the dirt and grime from the surface. Use one to remove the very stubborn stains and dirty areas.

Step 7 :

The driveway should now be clean. It is ready for the final rinse to flush away the detergent. Attach the 25 degree nozzle and give it a thorough rinse.

Along with following the above given process thoroughly make sure that you’re being environmentally efficient (by using recycled water), wear safety goggles to protect your eyes and keep a watch that nobody comes at the place where the washing is being done.

AUDIO VERSION :

About the Author – Admin

Leave a Reply

avatar
  Subscribe  
Notify of